Graph Type Define how different channels will be shown for this sensor. They will be active at the same time as the parent objects’ settings. Edit Sensor Channels To change display settings, spike filter, and limits, switch to the sensor’s Overview tab and click the gear icon of a specific channel. You can set another primary channel later by clicking the pin symbol of a channel in the sensor’s Overview tab.
This setting is shown for your information only and cannot be changed here. Inherited Settings By default, all following settings are inherited from objects higher in the hierarchy and should be changed there, if necessary. Set up a one-time maintenance window : Pause monitoring within a maintenance window. Set sensor to «warning» for 2 intervals, then set to «down» : Show an error status only after three continuously failed requests. Set sensor to «warning» for 1 interval, then set to «down» (recommended) : After the first failed request, the sensor will show a yellow warning status. If the following request also fails, the sensor will show an error.
Select your product (technology) from the menu below and follow the steps to download your printer driver. These are visible above as Parent Tags . Priority Select a priority for the sensor. Parent Tags Shows Tags that this sensor inherits from its parent device, group, and probe. For previous scanning intervals with failed requests, the sensor will show a Warning status. Exception: If a child object is visible to the user, the object is visible in the device tree, though not accessible. However, there is an advanced procedure to do so.